Step 1
Install the outdoor antenna on the roof of the building, as high as possible where you have a good signal. Ensure that it faces the cell tower to get the best signal reception (meaning better than 70dBm).
Step 2
Connect the outdoor antenna to the signal repeater (“BTS” port), by using a cable. Using waterproof tape, wrap the junction of the outdoor antenna and the cable well. The distance between the outdoor antenna and the booster unit is recommended to be from 10-20 meters.
Step 3
The signal repeater “MS” port is used to connect it to the indoor antenna by a coax cable. The recommended distance between the indoor antenna and the booster unit is 3-5 meters
Note: If there is more than one antenna, please connect them using the spl.
Step 4
After all the units have been installed, check them carefully to make sure that all the cable connectors are tight, before plugging it into the power supply.
